The heavyMaster sliding door drive is the problem-solver for your special requirements.
Sliding panels with large dimensions or heavy weights of up to 200 kg are driven reliably and silently.
Even in very high-traffic entrance areas, the heavyMaster ensures optimal running
characteristics with the least wear, thanks to the stable carriage and large rollers with
rubber-coated running face. Sliding Panels framed with thermally broken Profile systems or steel profiles are ideally suited for assembly with heavyMaster.
The drives are certified to DIN 18650/EN 16005 and type-tested by TÜV and comply with the current directives and standards. The HM-F drive system is tested and suitable for use in escape and rescue routes (AutSchR).
Application | 1-leaf | 2-leaf |
---|---|---|
Clear passage width [1] [2] | 800-2000mm | 800-3000mm |
Clear passage height [1] | max. 3000mm | |
Height of drive | 130mm | |
Door leaf weight | max. 200kg / leaf | |
Supply voltage | 230V AC, 50Hz | |
Power consumption | max. 160 VA (50 VA during operation) | |
Hold-open time | 0-99 s | |
Hold-open time with key impulse | 0-99 s | |
Opening speed | max. 0,9 m/s | |
Winter opening width [2] | 50% - 100% of the clear passage width | |
Protection type / ambient temperature | IP 20 (for dry rooms only) / -15 °C up to +50 °C |
[1] Standard dimensions, taking into account the overall measurement, the ratio of height and width and the local installation conditions; special solutions on request.
[2] The mandatory escape route width must be observed.
Keine Einträge vorhanden
GU Automatic GmbH
Karl-Schiller-Straße 12
33397 Rietberg
Germany